Ebeco under floor foil kit

Now its even easier to install underfloor heating beneath wood, laminate and plastic with the Ebeco Foil Kit which gives you everything you need in one complete package. The strong, reliable foil is only 0.3 mm thick, so adds very little to the floor height. It is 43 cm wide with heat output of 100W/m. The foil contains no halogens or PVC.

The package includes the EB-Therm 200 thermostat with energy-saving function. The combination of the thermostat with the Ebisol insulation sheet and the foil gives a very fast-acting and energy-efficient system.

Packing

The Ebeco Foil Kit contains foil, thermostat, adhesive tape, terminals, connection cables (single-core double- insulated)and flexible conduit pipe. The only additional items needed are Ebisol insulating sheet and the crimping tool. The kit comes in six sizes, one of which is an upgrade kit without a thermostat. The foil is also available by the metre. This option may be chosen if the ready-made kits are not suitable.

Installation

Ebisol insulating sheet must be incorporated into the system to direct the heat upwards and to prevent downward heat losses. The foils are laid directly on the insulation and connected together with cables and terminals, using a special crimping tool. Voltage: 230V.

Model	Width	Length	Area m2	Area ft2
E2210640	43cm	13.5m	1-6m2	11'-65'
E2210642	43cm	18m	6-8m2	65-86'
E2210644	43cm	22.5m	8-10m2	86-108
E2210646	43cm	27m	10-12m2	108-129
E2210648	43cm	31.5 m	12-14m2	129-151
E2210650	43cm	22.5m	10m2	108